BFRSQ - KAL-GARD FA
- MSDS: BFRSQ
- Manufacturer: KAL GARD COATING AND MANUFACTURING CORP
- Product Name: KAL-GARD FA
- National Stock Number: 9150-00-834-5608
Product Identification
Product ID:KAL-GARD FA
MSDS Date:01/01/1987
FSC:9150
NIIN:00-834-5608
MSDS Number: BFRSQ
Responsible Party
SEPULVEDA, CA 91343-6106
US
Cage: 9G654
Contractor
Telephone: 818-894-3615
Cage: 9G654
Ingredients
ETHYL ALCOHOL (ETHANOL)
CAS: 64-17-5
RTECS: KQ6300000
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
RESIN-TYPE NOT SPECIFIED (TRADE SECRET)
PIGMENT-TYPE NOT SPECIFIED(TRADE SECRET)
ACGIH TLV: 0.5 MG/CUM
LUBRICANT-TYPE NOT SPECIFIED (TRADE SECRET)
ACGIH TLV: 10 MG/CUM
Hazards
Effects of Overexposure:INHAL:HEADACHE,DIZZINESS,NAUSEA. SKIN:
PRLNGD/REPTD CONTACT-DRYNESS,IRRIT;EYES:BURNING,IRRITAT.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR-GIVE O2/CPR AS SITUATION
DICTATES.GET MED. ATTN.;SKIN:REMOVE CONTAMINATED CLOTHNG. WASH SKIN
W/SOAP & H2O;EYES:FLUSH IMMEDIATELY W/LARGE AMTS OF H2O FOR 15MIN.
GET MEDICAL AT TN; INGEST:GET IMMEDIATE MED.ATTN.
Fire Fighting
Flash Point:<100F/<37.8C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:USE H2O SPRAY/FOG TO COOL FIRE-EXPOSED
CONTAINERS
Unusual Fire/Explosion Hazard:VAPOR CAN FLOW TO IGNITION SOURCES &
FLASHBACK
Accidental Release
Spill Release Procedures:WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT.
REMOVE HEAT & IGNITION SOURCES. VENTILATE AREA. CLEAN-UP W/INERT
ABSORBENT
Handling
Handling and Storage Precautions:STORE IN CLOSED CONTAINER IN COOL
AREA. PRODUCT CONTAINS A SMALL AMOUNT OF LEAD WHICH IS
BIOCUMULATIVE.MAINTAIN GOOD PERSONAL HYGIENE.
Exposure Controls
Respiratory Protection:NIOSH-APPRVD RESPIRATOR FOR ORGANIC VAPORS
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:CHEM-RESISTANT
Eye Protection:CHEM.SPLASH GOGGLES
Other Protective Equipment:AS REQUIRED TO MINIMIZE SKIN CONTACT.
Supplemental Safety and Health
MSDS DATE:7/24/86; INGRED. CONTD:STABILIZER- TYPE NOT SPECIFIED, % N/K,
TLV 0.15 MG/CUM. FROM THE TLV VALVE,THE APPARENTLY IS IN THE
STABILIZER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>78F/172.4C
Vapor Pres:>43
Vapor Density:>1.
Spec Gravity:1.572
Evaporation Rate & Reference:(ETHER =1), <1.
Solubility in Water:APPRECIABLE
Appearance and Odor:GRAY LIQUID; SOLVENT ODOR
Percent Volatiles by Volume:75
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS & STRONG ACIDS
Stability Condition to Avoid:AVOID HEAT,SPARKS,OPEN FLAME.
Hazardous Decomposition Products:CARBON DIOXIDE,CARBONMONOXIDE & SULFUR
DIOXIDE
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE
Disposal
Waste Disposal Methods:WASTE MAY BE BURNED IN AN APPROVED INCINERATOR,
OR DISPOSE OF IAW LOCAL,STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.